Carrying Out A Call Pickup - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Pickup

Carrying out a Call Pickup

Carrying out a Call Pickup
Performing this procedure can be carried out as follows:
• Using a character string on the internal telephone
Requirements:
– Call pickup enabled for the subscriber
– To carry out call pickup of an external call: Exchange line authorization assigned to the
subscriber for incoming calls (International, National, City or only incoming, with
emergency call)
If the answering machine has already taken the call, proceed as described in the following.
1. Pick up the receiver of your telephone.
2. Dial ##06.
3. Enter the internal telephone number of the answering machine that is conducting the
call to be picked up. The following entries are possible:
** and internal telephone number of the individual answering machine (If
you do not use a direct exchange line access, omit the **.)
** and internal telephone number of the line group (If you do not use a
direct exchange line access, omit the **.)
You are connected with the caller.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
291