Diag - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

diag

Syntax
Release Information
Description
Options
Mode
512
diag slotNumber [ subsystem ] [ force ]
Command introduced in JunosE Release 7.3.0.
Reboots the SRP module or line module in the specified slot on all E Series routers and
performs diagnostic tests. There is no no version.
slotNumber—Number of the chassis slot that contains the SRP module or line module
subsystem—Type of subsystem on the E120 router or the E320 router; use when the
specified slotNumber is a slot that contains an SRP module
srp—Indicates the system controller (SC) on one or both SRP modules; specify this
keyword to restart only the portion of the SC on the individual SRP module
fabric—Indicates the portion of the switch fabric on the SRP modules; specify this
keyword to restart only an individual fabric slice
force—Specifies that the system manually confirm conflicting conditions when the
slot of the active SRP module is specified
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.