Layout Line/Arc/Spiral (Optional) - Leica Builder Series User Manual

10.9
Description

Diagram Line
Builder, Application Programs, for Builder 200 or higher

Layout Line/Arc/Spiral (optional)

The application program Layout Line/Arc/Spiral facilitates the easy stake out or
checking of lines, grids, arcs, segments and spirals. Besides the usual layout of these
elements, this application allows the user to stake out and check points relative to a
road alignment.
The application program Layout Line/Arc/Spiral is only available for the Builder 300 or
higher. The program can be started in total 40 times for trial. Afterwards you have
to enter the license code.
RP2
EP
R
d1
RP1
SF
SP
SR
SP
EP
d2
RP1 Reference line start point
P
RP2 Reference line end point
SF
SR
R
d1
d2
P
Start point
End point
Shift forward
Shift right
Rotate
Line
Offset
Point to stake or check
137