Preparation; Attaching The Carry Strap; Inserting/Changing The Battery - Leica RANGEMASTER CRF R Instruction Manual

PREPARATION

ATTACHING THE CARRY STRAP

▸ Thread the small loop of the carry strap through the strap lug
▸ Thread the strap through the small loop
▸ Pull tight
• The loop created should lie tightly around the strap lug.
Caution
• Check the correct attachment of the carry strap by pulling at it
with some force. The length of the carry strap must not change.

INSERTING/CHANGING THE BATTERY

A cylindrical 3 V lithium cell (type CR2) is required for power supply.
▸ Turn the lid over the battery compartment in anti-clockwise di-
rection
▸ Remove the lid
▸ Insert the battery with the plus contact first
▸ Attach the lid
▸ Tighten the lid by turning it in clock-wise direction
BATTERY CHARGE LEVEL
The measured value and reticule display will flash when the battery
nears depletion. You will still have enough power for another 50
measurements – but with a gradually reducing range – once the
display begins flashing.
11
PREPARATION