Display And Checking Of The Settings - Leica PINMASTER II PRO Instructions Manual

Settings
If the device is switched on: Wait until the display goes
out. If the device is not switched on:
Start with Step 1.
1. Hold the auxiliary button
• appears.
USEU
2. Press the auxiliary button 3x briefly (<2s)
• The display changes.
3. Press the main button
setting (ACD
ON/OFF).
4. Save your setting by briefly pressing the auxiliary
button.
• The saved setting is displayed for 4s for
confirmation, then the display goes out.
1
depressed (≥3s).
2
to select the desired

DISPLAY AND CHECKING OF THE SETTINGS

If you wish to check your settings, you can display the
values at any time.
Press the auxiliary button
• Below the target mark, the following are displayed
in turn for approx, 2s each (possibly instead of the
distance)
– the set units system
(EU or US)
– (only if the function is activated)
ACD
1
2x briefly.
EN
29