11.2 Power control configuration
11.2.1 List of configuration commands
The following table describes the configuration commands for implementing power control.
Table 11-11 List of configuration commands
Command name
For setting a normal time
range
system port-led
system port-led trigger interface
system port-led trigger console
system port-led trigger mc
power-control port
cool-standby
#
system fan-control
[AX1240S]
shutdown
n/a
n/a
Legend:
n/a: Not applicable
#
The setting is common to the normal time range and the scheduled time range.
For setting a scheduled time
range
schedule-power-control port-led
#
#
#
schedule-power-control port
cool-standby
schedule-power-control shutdown
interface
schedule-power-control
system-sleep
[AX1250S] [AX1240S]
schedule-power-control
time-range
11 Power Saving Functionality
Description
Configures a Switch's LED operation.
Adds link-up and link-down of the
specified physical port a trigger for
automatic LED operation.
Adds login to and logout from a Switch
via a console (RS232C) connection as a
trigger for automatic LED operation.
Adds insertion and removal of a memory
card as a trigger for automatic LED
operation.
Enables power saving for ports in the
link-down status
Enables cooling fan control
(Semi-fanless operation)
Sets the port blocking operation.
Sets sleep mode.
Sets the power control scheduled time
range.
143