8. Power Saving Functionality
schedule-power-control shutdown
Sets a port that is disabled when scheduled power saving functionality is in use.
Disabling the port turns off the power, reducing the amount of power consumption.
Syntax
To set information:
schedule-power-control shutdown interface <interface id list>
To change information:
schedule-power-control shutdown interface {<interface id list> | add <interface id list> |
remove <interface id list> }
To delete information:
no schedule-power-control shutdown interface
Input mode
(config)
Parameters
interface <interface id list>
Specifies the port to be disabled in list format. If you specify <interface id list> to change
information, the information is replaced with the contents of the specified list.
1.
Default value when this parameter is omitted:
This parameter cannot be omitted.
2.
Range of values:
See Specifiable values for parameters.
interface add <interface id list>
Adds ports to be disabled to the list.
1.
Default value when this parameter is omitted:
This parameter cannot be omitted.
2.
Range of values:
See Specifiable values for parameters.
interface remove <interface id list>
Removes ports to be disabled from the list.
1.
Default value when this parameter is omitted:
This parameter cannot be omitted.
2.
Range of values:
See Specifiable values for parameters.
Default behavior
A port operates in the status other than
For the port status, see the
102
.
disable
command.
show interfaces