Adding A User Id And Deleting The Operator User Id - Alaxala AX6300S Quick Start Manual

3.5 Adding a user ID and deleting the operator user ID

[Step 1] Creating a user ID and setting the login password
Create a new user ID and set the login password. The following example shows
how to create the user ID
NOTE
[Step 2] Deleting the operator user ID
Delete the default user ID (operator).
NOTE
newuser
We recommend that you use six or more characters for the password. If a
password consisting of fewer than six characters is entered, an error is
displayed. A password of fewer than six characters can still be used by entering
it again. Also, the maximum number of characters that can be used for a
password is 128. If you enter 129 or more characters, only the first 128
characters are registered for the password. We recommend that you use
upper-case alphabetic characters, numbers, and symbols in addition to
lower-case alphabetic characters. If a password consists of only lower-case
alphabetic characters, an error is displayed. Note, however, that if you re-enter
the same password, it will be accepted.
If you forget your user ID, you cannot log in.
Do not forget your user ID.
3. Required Operations When Installing a Switch
and set a password for it.
23