Interface Gigabitethernet - Alaxala AX3640S Software Manual

interface gigabitethernet

Sets the items related to an Ethernet interface that has a maximum line speed of 1000 Mbit/s.
Entering this command switches to
can be set.
Syntax
To set information:
interface gigabitethernet <nif no.>/<port no.>
Input mode
(config)
Parameters
<nif no.>/<port no.>
Specifies the NIF number and the port number.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
See Specifiable values for parameters.
Default behavior
None
Impact on communication
None
When the change is applied
None
Notes
1. The port name is
For example, the name of the 0/1 port will be
2. This command cannot be deleted.
Related commands
None
config-if
+ <NIF number> +
geth
mode, in which information about the relevant port
+ <port number>.
/
.
geth0/1
9. Ethernet
119