Initiating An Internal Call - Auerswald COMpact 5200 Advanced Information

Phoning
Outgoing Calls
where external numbers can overlap with internal numbers, you can use
the function "Force public exchange call with automatic exchange line
request".
Also when the entered phone number correspond with the internal
phone numbering plan, the PBX waits up to 4 seconds for whether
additional digits for an external number are being entered, before it dials
the internal phone number. To avoid waiting time, you can subsequently
enter #. The PBX therefore recognises the input as finished and instantly
starts dialling.

Initiating an Internal Call

Internal calls are free of charge.
1. Pick up the receiver.
2. Enter an internal number. Possible entries:
Internal number of the individual phone
type Direct exchange line phone: with preceding **)
Internal number of the group
exchange line phone: with preceding **)
Once you have finished dialling the phone number, the subscriber will
be called.
Note: If the internally called subscriber is busy, you can knock on his
phone after a short waiting (if call waiting is allowed on his phone).
240
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
(for exchange line request
(for exchange line request type Direct