Display Arp Ip-Address - H3C S7500E Series Command Manual

Command Manual – ARP
H3C S7500E Series Ethernet Switches
Description
Use the display arp command to display ARP entries in the ARP mapping table.
Related commands: arp static, reset arp.
Examples
# Display the information of all ARP entries.
<Sysname> display arp all
IP Address
20.1.1.1
193.1.1.70
192.168.0.115
192.168.0.39
Table 1-1 Description on the fields of the display arp command
IP Address
MAC Address
VLAN ID
Interface
Aging
Type
# Display the number of all ARP entries
<Sysname> display arp all count
Total Entry(ies): 4

1.1.5 display arp ip-address

Syntax
display arp ip-address [ slot slot-id ] [ verbose ] [ | { begin | exclude | include } string ]
View
Any view
Parameters
ip-address: Displays the ARP entry for the specified IP address.
slot slot-id: Displays the ARP entry for the specified slot.
Type: S-Static
MAC Address
000f-e200-0001
00e0-fe50-6503
000d-88f7-9f7d
0012-a990-2241
Field
IP address in an ARP entry
MAC address in an ARP entry
VLAN ID contained a static ARP entry
Outbound port in an ARP entry
Aging time for a dynamic ARP entry in minutes. "DIS" means
the ARP entry is learned from an interface board.
ARP entry type: D stands for dynamic and S for static.
Chapter 1 ARP Configuration Commands
D-Dynamic
VLAN ID Interface
N/A N/A
100 GE2/0/1
1 GE2/0/2
1 GE2/0/3
Description
1-4
Aging Type
N/A S
DIS D
DIS D
DIS D