H3C S7500E Series Command Manual page 761

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Examples
# View the IGMP configuration and running status on VLAN-interface 1.
<Sysname> display igmp interface Vlan-interface 1 verbose
Vlan-interface1 (10.10.1.20):
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier present interval for IGMP(in seconds): 125
Value of maximum query response time for IGMP(in seconds): 10
Value of last member query interval(in seconds): 1
Value of startup query interval(in seconds): 15
Value of startup query count: 2
General query timer expiry (hours:minutes:seconds): 00:00:54
Querier for IGMP: 10.10.1.10
IGMP activity: 0 joins, 0 leaves
Multicast routing on this interface: enabled
Robustness: 2
Require-router-alert: disabled
Fast-leave: disabled
Startup-query-timer-expiry: off
Other-querier-present-timer-expiry: off
Table 3-3 Description on the fields of the display igmp interface command
Vlan-interface1 (10.10.1.20)
Current IGMP version
Value of query interval for IGMP(in
seconds)
Value of other querier present interval
for IGMP(in seconds)
Value of maximum query response time
for IGMP(in seconds)
Value of last member query interval(in
seconds)
Value of startup query interval(in
seconds)
Value of startup query count
General query timer expiry
Field
3-5
Chapter 3 IGMP Configuration Commands
Description
Interface name (IP address)
Version of IGMP currently running on the
interface
IGMP query interval, in seconds
Other querier present interval, in
seconds
Maximum response time for IGMP
general queries, in seconds
IGMP last member query interval, in
seconds
IGMP startup query interval, in seconds
Number of IGMP general queries the
device sends on startup
Remaining time of the IGMP general
query timer