Display Logbuffer Summary - H3C S7500E Series Command Manual

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Examples
# Display the state of the log buffer and the log information recorded on the device.
<Sysname> display logbuffer
Logging buffer configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 512
Channel number : 4 , Channel name : logbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 6
%Apr 26 17:50:00:681 2007 H3C DEV/4/FAN ABSENT:
Fan 1 is absent.
......Omitted......
Table 1-6 Descriptions on the fields of the display logbuffer command
Logging buffer configuration
and contents
Allowed max buffer size
Actual buffer size
Channel number
Channel name
Dropped messages
Overwritten messages
Current messages

1.1.4 display logbuffer summary

Syntax
display logbuffer summary [ level severity | slot slotnum ] *
View
Any view
Field
Indicates the current state of the log buffer and its
contents, which could be enabled or disabled.
The maximum buffer size allowed
The actual buffer size
The channel number of the log buffer, defaults to 4
The channel name of the log buffer, defaults to
logbuffer
The number of dropped messages
The number of overwritten messages (when the
buffer size is not big enough to hold all messages,
the latest messages overwrite the old ones).
The number of the current messages
1-7
Chapter 1 Information Center Configuration
Description
Commands