Hello-Option Override-Interval; Holdtime Assert - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Related commands: pim hello-option neighbor-tracking.
Examples
# Disable join suppression globally.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option neighbor-tracking

4.1.28 hello-option override-interval

Syntax
hello-option override-interval interval
undo hello-option override-interval
View
PIM view
Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use the hello-option override-interval command to configure the global value of the
prune override interval.
Use the undo hello-option override-interval command to restore the system default.
By default, the prune override interval is 2,500 milliseconds.
This command is effective for both PIM-DM and PIM-SM.
Related commands: hello-option lan-delay, pim hello-option lan-delay, pim
hello-option override-interval.
Examples
# Set the prune override interval to 2,000 milliseconds globally.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option override-interval 2000

4.1.29 holdtime assert

Syntax
holdtime assert interval
undo holdtime assert
Chapter 4 PIM Configuration Commands
4-30