Clock Datetime; Chapter 1 Basic Configuration Commands - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – System Maintaining and Debugging

H3C S7500E Series Ethernet Switches

1.1 Basic Configuration Commands

1.1.1 clock datetime

clock datetime time date

time: Current time in the format of HH:MM:SS, where HH is hours in the range 0 to 23,

MM is minutes in the range 0 to 59, and SS is seconds in the range 0 to 59. The zeros

in the argument can be omitted except for indicating 0 hours.

date: Current date in the format of MM/DD/YYYY or YYYY/MM/DD. MM is the month of

the year in the range 1 to 12, DD is the day of the month that varies with months, and

YYYY is a year in the range 2000 to 2035.

Use the clock datetime command to set the current time and date of the device.

The current time and date of the device must be set in an environment that requires the

acquisition of absolute time.

You may choose not to provide seconds when inputting the time parameters.

Related commands: clock summer-time one-off, clock summer-time repeating,

clock timezone, display clock.

# Set the current system time to 14:10:20 08/01/2005.

<Sysname> clock datetime 14:10:20 8/1/2005

# Set the current system time to 00:06:00 01/01/2007.

<Sysname> clock datetime 0:6 2007/1/1

Chapter 1 Basic Configuration Commands

Table of Contents