Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Chapter 3 IGMP Configuration Commands
Note:
The term "router" in this document refers to a router in a generic sense or a Layer 3
switch running IGMP.
3.1 IGMP Configuration Commands
3.1.1 display igmp group
Syntax
display igmp group [ group-address | interface interface-type interface-number ]
[ static | verbose ]
View
Any view
Parameters
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
interface interface-type interface-number: Displays the IGMP multicast group
information about a particular interface.
static: Displays the information of statically joined IGMP multicast groups
verbose: Displays the detailed information of IGMP multicast groups.
Description
Use the display igmp group command to view IGMP multicast group information.
Note that:
If you do not specify group-address, this command will display the IGMP
information of all the multicast groups.
If you do not specify interface-type interface-number, this command will display
the IGMP multicast group information on all the interfaces.
If you do not specify the static keyword, this command will display the detailed
information about the dynamically joined IGMP multicast groups.
Chapter 3 IGMP Configuration Commands
3-1