Ftp Timeout; Ftp Server Enable - H3C S7500E Series Command Manual

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
Note that if the user to be released is transmitting a file, the connection between the
user and the FTP server is terminated after the file transmission.
Examples
# Manually release the FTP connection established with username of ftpuser.
<Sysname> free ftp user ftpuser
Are you sure to free FTP user ftpuser? [Y/N]:y
<Sysname>

2.1.4 ftp server enable

Syntax
ftp server enable
undo ftp server
View
System view
Parameters
None
Description
Use the ftp server enable command to enable the FTP server.
Use the undo ftp server command to disable the FTP server.
By default, the FTP server is disabled to prevent attacks.
Examples
# Disable the FTP server.
<Sysname> system-view
[Sysname] undo ftp server
% Close FTP server

2.1.5 ftp timeout

Syntax
ftp timeout minute
undo ftp timeout
View
System view
Chapter 2 FTP Configuration Commands
2-3