Display Poe Interface - H3C S7500E Series Command Manual

Command Manual – PoE
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
None
Description
Use the display poe device command to display the mapping between ID, module,
and slot of all the power sourcing equipments (PSEs).
Examples
# Display the mapping between ID, module, and slot of each PSE.
<Sysname> display poe device
PSE ID
10
Table 1-1 Description on the fields of the display poe device command
PSE ID
SlotNo
SubSNo
PortNum
MaxPower(W)
State
Model

1.1.4 display poe interface

Syntax
display poe interface [ interface-type interface-number ]
View
Any view
SlotNo SubSNo PortNum
3 0 48
Field
ID of the PSE
Slot number of the PSE
Subslot number of the PSE
Number of PoE interfaces on the PSE
Maximum power of the PSE (W)
PSE state:
on: The PSE is supplying power.
off: The PSE stops supplying power.
faulty: The PSE fails.
PSE model
Chapter 1 PoE Configuration Commands
MaxPower(W) State
100
Description
1-3
Model
on LSQ1GV48SC