Display Logfile Summary - H3C S7500E Series Command Manual

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Parameters
None
Description
Use the display logfile buffer command to display contents of the logfile buffer.
Note that all contents in the logfile buffer will be cleared after they are successfully
saved into the log file automatically or manually.
Examples
# Display the contents of the logfile buffer.
<Sysname> display logfile buffer
%@0%May
System restarted --
H3C Comware Software
......Omitted......

1.1.6 display logfile summary

Syntax
display logfile summary
View
Any view
Parameters
None
Description
Use the display logfile summary command to display the configuration of the log file.
Examples
# Display the configuration of the log file.
<Sysname> display logfile summary
Log file is enabled.
Channel number : 9
Log file size quota : 1 MB
Log file directory : cf:/logfile
Writing frequency : 24 hour 0 min 0 sec
8 07:18:51 2007 H3C %%10IC/6/SYS_RESTART:
Chapter 1 Information Center Configuration
1-9
Commands