H3C S7500E Series Command Manual page 947

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Auth reject
EAP auth replying
Account success
Account failure
Server ctrl req
RecError_MSG_sum
SndMSG_Fail_sum
Timer_Err
Alloc_Mem_Err
State Mismatch
Other_Error
No-response-acct-stop packet
Discarded No-response-acct-stop
packet for buffer overflow
1.2.4 display stop-accounting-buffer
Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name } [ slot
slot-number ]
View
Any view
Parameters
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which
is a string of 1 to 32 characters.
session-id session-id: Specifies a session by its ID. The ID is a string of 1 to 50
characters.
Field
1-38
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
Description
Number of rejected authentication
packets
Number of replying packets of EAP
authentication
Number of accounting succeeded
packets
Number of accounting failed packets
Number of server control requests
Number of received packets in error
Number of packets that failed to be sent
out
Number of timer errors
Number of memory errors
Number of errors for mismatching status
Number of errors of other types
Number of times that no response was
received for stop-accounting packets
Number of stop-accounting packets that
were buffered but then discarded due to
full memory