H3C S7500E Series Command Manual page 881

Command Manual – 802.1x - MAC Authentication
H3C S7500E Series Ethernet Switches
Guest VLAN
Max on-line user number
EAPOL Packet
Sent EAP Request/Identity Packets
EAP Request/Challenge Packets
EAP Success Packets
Received EAPOL Start Packets
EAPOL LogOff Packets
EAP Response/Identity Packets
EAP Response/Challenge Packets
Error Packets
Controlled User(s) amount
1.1.2 dot1x
Syntax
In system view:
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
In Ethernet interface view:
dot1x
undo dot1x
View
System view, interface view
Parameters
interface interface-list: Specifies a port list, which can contain multiple ports. The
interface-list argument is in the format of interface-list = { interface-type
interface-number [ to interface-type interface-number ] } & <1-10>, where
Field
1-4
Chapter 1 802.1x Configuration Commands
Description
Guest VLAN configured for the port. The
value of 0 means that no guest VLAN is
configured.
Maximum number of users supported on the
port
Number of EAPOL packets received (Tx) or
sent (Rx)
Number of EAP Request/Identity packets sent
Number of EAP Request/Challenge packets
sent
Number of EAP Success packets sent
Number of EAPOL Start packets received
Number of EAPOL LogOff packets received
Number of EAP Response/Identity packets
received
Number of EAP Response/Challenge packets
received
Number of erroneous packets received
Number of controlled users on the port