H3C S7500E Series Command Manual page 1162

Command Manual – Port Mirroring
H3C S7500E Series Ethernet Switches
type: remote-source
status: active
mirroring port:
monitor egress port: Ethernet2/0/11
remote-probe vlan: 200
Table 1-1 Description on the fields of the display mirroring-group command
mirroring-group
type
status
mirroring port
monitor port
monitor egress port
remote-probe vlan
1.1.2 mirroring-group
Syntax
mirroring-group group-id { local | remote-destination | remote-source }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
View
System view
Parameters
group-id: Port mirroring group number, in the range of 1 to 4.
all: Removes All the port mirroring groups.
local: Creates/Removes a local port mirroring group.
remote-destination: Creates/Removes a remote destination port mirroring group.
remote-source: Creates/Removes a remote source port mirroring group.
Description
Use the mirroring-group command to create a port mirroring group.
Use the undo mirroring-group command to remove a port mirroring group.
Ethernet2/0/3 both
Field
Port mirroring group number
Port mirroring group type, which can be local,
remote-source, and remote-destination.
Status of a port mirroring group. "active" for already
effective, and "inactive" for not effective yet.
Source mirroring port
Destination mirroring port
Outbound mirroring port
Remote mirroring VLAN
Chapter 1 Port Mirroring Configuration Commands
Description
1-2