Display Bgp Ipv6 Routing-Table Dampening Parameter - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Description
Use the display bgp ipv6 routing-table dampened command to display the IPv6
BGP dampened routes.
Examples
# Display IPv6 BGP dampened routes.
<Sysname> display bgp ipv6 routing-table dampened
BGP Local router ID is 1.1.1.1
Status codes: * - valid, > - best, d - damped,
*d Network : 111::
From
Path/Ogn: 200?
Table 5-6 Description on the fields of the display bgp ipv6 routing-table dampened
command
From
Reuse
Refer to

5.1.19 display bgp ipv6 routing-table dampening parameter

Syntax
display bgp ipv6 routing-table dampening parameter
View
Any view
Parameters
None
Description
Use the display bgp ipv6 routing-table dampening parameter command to display
IPv6 BGP routing dampening parameters.
Related commands: dampening.
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
: 122::1
Field
Table 5-5 for description on the fields above.
Chapter 5 IPv6 BGP Configuration Commands
i - internal, s - suppressed, S - Stale
Source IP address of a route
Time for reuse
5-18
PrefixLen : 64
Reuse : 00:29:34
Description