H3C S7500E Series Command Manual page 1304

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Table 1-3 Description on the fields of the display info-center command
Information Center
Log host:
2.2.2.2, channel number : 8,
channel name : channel8,
host facility local7
Console:
channel number : 0, channel
name : console
Monitor:
channel number : 1, channel
name : monitor
SNMP Agent:
channel number : 5, channel
name : snmpagent
Log buffer:
enabled,max buffer size 1024,
current buffer size 512,
current messages 512,
dropped messages 0,
overwritten messages 740
channel number : 4, channel
name : logbuffer
Trap buffer:
enabled,max buffer size 1024,
current buffer size 256,
current messages 216,
dropped messages 0,
overwritten messages 0
channel number : 3, channel
name : trapbuffer
logfile:
channel number:9, channel
name:channel9
Information timestamp setting
Field
1-4
Chapter 1 Information Center Configuration
Description
The current state of the information center,
which could be enabled or disabled.
The information of the log host channel (It can
be displayed only when the info-center loghost
command is configured), including IP address of
the log host, the channel number(s) and channel
name(s) used, and logging facility used.)
The console channel information, including the
channel number(s) and channel name(s) used
The monitor channel information, including the
channel number(s) and channel name(s) used
The SNMP agent channel information, including
the channel number(s) and channel name(s)
used
The information of the log buffer channel,
including whether it is enabled or disabled, the
maximum capacity, the current capacity, the
current number of messages, the number of
dropped messages, the number of messages
that have been overwritten, and the channel
number(s) and channel name(s) used.
The information of the trap buffer channel,
including whether it is enabled or disabled, the
maximum capacity, the current capacity, the
current number of messages, the number of
dropped messages, the number of messages
that have been overwritten, and the channel
number(s) and channel name(s) used.
The logfile configurations information, including
the channel number(s), and channel name(s)
used.
The timestamp configurations, specifying the
timestamp format for log, trap, debug, and log
host information.
Commands