Display Ospfv3 Topology - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Type
Input
Output
Hello
DB Description
Ls Req
Ls Upd
Ls Ack

3.1.16 display ospfv3 topology

Syntax
display ospfv3 [ process-id ] topology [ area area-id ]
View
Any view
Parameters
process-id: Displays the topology information of an OSPFv3 process; The process ID
ranges from 1 to 65535.
area: Displays the topology information of the specified area.
area-id: ID of an area, a decimal integer (in the range of 0 to 4294967295) that is
translated into IPv4 address format by the system or an IPv4 address.
Description
Use the display ospfv3 topology command to display OSPFv3 topology information.
If no process is specified, topology information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 area 1 topology information.
<Sysname> display ospfv3 topology area 1
OSPFv3 Area (0.0.0.1) topology
Type ID(If-Index)
Rtr 1.1.1.1
Rtr 2.2.2.2
Field
Type of packet
Number of packets received by the interface
Number of packets sent by the interface
Hello packet
Database description packet
Link state request packet
Link state update packet
Link state acknowledgement packet
OSPFv3 Process (1)
Bits
Chapter 3 IPv6 OSPFv3 Configuration Commands
Description
Metric Next-Hop
--
1 2.2.2.2
3-22
Interface
Vlan100