Display Transceiver Interface - H3C S7500E Series Command Manual

Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches
Voltage(V)
Bias(mA)
RX power(dBM)
TX power(dBM)

3.1.15 display transceiver interface

Syntax
display transceiver interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver interface command to display main parameters of a
single or all transceivers.
Examples
# Display main parameters of the pluggable transceiver on interface GigabitEthernet
2/0/3.
<Sysname> display transceiver interface gigabitethernet 2/0/3
GigabitEthernet2/0/3 transceiver information:
Transceiver Type
Connector Type
Wavelength(nm)
Transfer Distance(km)
Digital Diagnostic Monitoring
Vendor Name
Ordering Name
Field
3-17
Chapter 3 Device Management Commands
Description
Digital diagnosis parameter-voltage, in V, with
the precision to 0.01 V.
Digital diagnosis parameter-bias current, in
mA, with the precision to 0.01 mA.
Digital diagnosis parameter-RX power, in dBM,
with the precision to 0.01 dBM.
Digital diagnosis parameter-TX power, in dBM,
with the precision to 0.01 dBM.
: 1000_BASE_LX_SFP
: LC
: 1310
: 10(9um)
: YES
: H3C
: SFP-GE-LX10-SM1310