H3C S7500E Series Command Manual page 1263

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – File System Management

H3C S7500E Series Ethernet Switches

src-addr: IP address or name of a TFTP server. The address cannot be an IPv6

src-filename: Filename of the configuration file to be downloaded from the specified

Use the restore startup-configuration command to download the configuration file

from the specified TFTP server for the next startup of the device.

This command downloads the configuration file to the main board and meanwhile

copies the file to the backup board.

This command downloads the configuration file for next startup.

If the file to be downloaded has the same filename as an existing file on the main or

backup board, you will be prompted whether you want to overwrite the existing file or

not. In addition, both the main board and the backup board are assumed to use the

storage device of the same type when checking filename or downloading the

configuration file (both to the root directory of the main board or backup board),

otherwise, the restoration fails.

# Download the configuration file config.cfg for the next startup from the TFTP server

whose IP address is .2.2.2.2.

<Sysname>restore startup-configuration from 2.2.2.2 config.cfg

Restore next startup-configuration file from 2.2.2.2. Please wait...finished!

Now restore next startup-configuration file from main to slave board, Please

wait...finished!

save [ file-name | [ safely ]

file-name: File name, whose suffix must be .cfg.

Chapter 1 File System Management Commands

Chapters

Table of Contents