Chapter 2 Ha Configuration Commands; Ha Configuration Commands; Display Switchover State - H3C S7500E Series Command Manual

Command Manual – HA
H3C S7500E Series Ethernet Switches

Chapter 2 HA Configuration Commands

2.1 HA Configuration Commands

2.1.1 display switchover state

Syntax
display switchover state [ slot-id ]
View
Any view
Parameters
slot-id: Slot ID of the active main board (AMB) or standby main board (SMB).
Description
Use the display switchover state command to display the switchover state.
The switchover state of the corresponding card will be displayed if slot number is
specified. The switchover state of the AMB will be displayed if no slot number is
specified.
Examples
# Display the switchover state on the AMB.
<Sysname> display switchover state
HA FSM State(master): Slave is absent.
Table 2-1 Description on the fields of the display switchover state command
Slave is absent
Waiting batch backup request from slave
Batch backup
Realtime and routine backup to slave
Field
2-1
Chapter 2 HA Configuration Commands
Description
The SMB is not in the slot.
Waiting for the backup requests from the
SMB
Backup state
Real-time or routine backup state