H3C S7500E Series Command Manual page 1287

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
Description
Use the passive command to set the data transmission mode to passive.
Use the undo passive command to set the data transmission mode to active.
The default transmission mode is passive.
Examples
# Set the data transmission mode to passive.
[ftp] passive
FTP: passive is on
2.2.22 put
Syntax
put localfile [ remotefile ]
View
FTP client view
Parameters
localfile: Local file name.
remotefile: Name of the file to be saved on the remote FTP server.
Description
Use the put command to upload a file to the remote FTP server.
If no name is assigned to the file to be saved on the FTP server, the name of the source
file is used by default.
Examples
# Upload source file cc.txt to the remote FTP server and save it as dd.txt.
[ftp] put cc.txt dd.txt
227 Entering Passive Mode (192,168,1,50,17,169).
125 ASCII mode data connection already open, transfer starting for dd.txt.
226 Transfer complete.
FTP: 9 byte(s) sent in 0.112 second(s), 80.00byte(s)/sec.
2.2.23 pwd
Syntax
pwd
Chapter 2 FTP Configuration Commands
2-21