H3C S7500E Series Command Manual page 1198

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
specified, the display current-configuration | include snmp command displays
the cipher text password.
If you execute this command repeatedly to configure the same user, the last
configuration takes effect.
Related
snmp-agent usm-user { v1 | v2c }.
Examples
# Add a user testUser to the SNMPv3 group testGroup. Configure the security model
as authentication, the authentication protocol as MD5, the privacy protocol as DES56,
the authentication plain text password as authkey, and the authentication cipher text
password as prikey.
<Sysname> system-view
[Sysname] snmp-agent usm-user v3 testUser testGroup authentication-mode md5
authkey privacy-mode des56 prikey
# Add a user testUser to the SNMPv3 group testGroup with the cipher keyword
specified. Configure the security model as authentication and privacy, the
authentication protocol as MD5, the privacy protocol as DES56, the authentication
plain text password as authkey, and the authentication cipher text password as prikey
<Sysname> system-view
[Sysname] snmp-agent calculate-password authkey mode md5 local-engineid
The secret key is: 09659EC5A9AE91BA189E5845E1DDE0CC
[Sysname] snmp-agent calculate-password prikey mode md5 local-engineid
The secret key is: 800D7F26E786C4BECE61BF01E0A22705
[Sysname]
authentication-mode md5 09659EC5A9AE91BA189E5845E1DDE0CC privacy-mode des56
800D7F26E786C4BECE61BF01E0A22705
commands: snmp-agent
snmp-agent usm-user
Chapter 1 SNMP Configuration Commands
calculate-password,
v3 testUser
1-27
snmp-agent group,
testGroup cipher