H3C S7500E Series Command Manual page 564

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
intra-prefix: Displays the Intra-area-prefix LSA information of the OSPFv3 link state
request list.
link: Displays the Link LSA information of the OSPFv3 link state request list.
network: Displays the Network-LSA information of the OSPFv3 link state request list.
router: Displays the Router-LSA information of the OSPFv3 link state request list.
link-state-id: Link state ID, in the format of an IPv4 address.
originate-router ip-address: Specifies the router ID of an advertising router.
statistics: Displays the LSA statistics of the OSPFv3 link state request list.
Description
Use the display ospfv3 request-list command to display OSPFv3 link state request
list information.
If no process is specified, link state request list information of all OSPFv3 processes is
displayed.
Examples
# Display the information of OSPFv3 link state request list.
<Sysname> display ospfv3 request-list
--------------------------------------------------------------------------
LS-Type
Router-LSA
Table 3-10 Description on the fields of the display ospfv3 request-list command
Interface
Area-ID
Nbr-ID
LS-Type
LS-ID
AdvRouter
SeqNum
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Vlan100
Nbr-ID
LS-ID
0.0.0.0
Field
Chapter 3 IPv6 OSPFv3 Configuration Commands
Area-ID 0.0.0.0
12.1.1.1
AdvRouter
12.1.1.1
Interface name
Area ID
Neighbor router ID
Type of LSA
Link state ID
Advertising router
LSA sequence number
3-16
SeqNum Age
0x80000014 774 0xe5b0
Description
CkSum