H3C S7500E Series Command Manual page 930

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
lan-access refers to users accessing the network through an Ethernet, such as
802.1x users;
ssh refers to users using SSH;
telnet refers to users using Telnet;
terminal refers to users logging in through the console port or AUX port.
state { active | block }: Specifies all local users in the state of active or block. A local
user in the state of active can access network services, while a local user in the state of
blocked cannot.
user-name user-name: Specifies all local users using the specified username. The
username is a case-sensitive string of 1 to 55 characters.
vlan vlan-id: Specifies all local users in a VLAN. The VLAN ID ranges from 1 to 4094.
slot slot-number: Specifies all local users in the slot where the interface card is
inserted.
Description
Use the display local-user command to display information about specified or all local
users.
Related commands: local-user.
Examples
# Display the information of local user bbb on the card installed on slot 1.
<Sysname> display local-user user-name bbb slot 0
Slot: 0
The contents of local user bbb:
State:
ServiceType:
Idle-cut:
Access-limit:
Bind location:
Vlan ID:
IP address:
MAC address:
User Privilege:
Total 1 local user(s) matched.
Table 1-3 Description on the fields of display local-user (for distributed device)
Slot
State
Active
lan-access
Disable
Enable
Disable
Disable
Disable
Disable
0
Field
Slot number of the card
Status of the local user, active or block
Chapter 1 AAA/RADIUS/HWTACACS
Current AccessNum: 100
Description
1-21
Configuration Commands