H3C S7500E Series Command Manual page 1255

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
%Moved file flash:/test/sample.txt to flash:/sample.txt
1.1.13 pwd
Syntax
pwd
View
User view
Parameters
None
Description
Use the pwd command to display the current path.
If the current path is not set, the operation will fail.
Examples
# Display the current path.
<Sysname> pwd
flash:
1.1.14 rename
Syntax
rename fileurl-source fileurl-dest
View
User view
Parameters
fileurl-source: Name of the source file or directory.
fileurl-dest: Name of the target file or directory.
Description
Use the rename command to rename a file or directory.
The target file name must be unique under the current path.
Examples
# Rename the file sample.txt as sample.bak.
<Sysname> rename sample.txt sample.bak
Chapter 1 File System Management Commands
1-10