Display Snmp-Agent Mib-View - H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
Description
Use the display snmp-agent group command to display information for the SNMP
agent group, including group name, security model, MIB view, storage type, and so on.
Absence of the group-name parameter indicates that information for all groups will be
displayed.
Examples
# Display the information of all SNMP agent groups.
<Sysname> display snmp-agent group
Group name: aa
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonVolatile
Table 1-2 Descriptions on the fields of the display snmp-agent group command
Field
Group name
Security model
Readview
Writeview
Notifyview
Storage-type

1.1.4 display snmp-agent mib-view

Syntax
display snmp-agent mib-view [ exclude | include | viewname view-name ]
View
Any view
Parameters
exclude: Specifies to display SNMP MIB views of the excluded type.
SNMP group name
Security model of the SNMP group, which can be: authPriv
(authentication with privacy), authNoPriv (authentication without
privacy), or noAuthNoPriv (no authentication no privacy).
The read only MIB view associated with the SNMP group
The writable MIB view associated with the SNMP group
The notify MIB view associated with the SNMP group, the view
with entries that can generate Trap messages
Storage type, which includes: volatile, nonVolatile, permanent,
readOnly, and other. For detailed information, refer to
1-3
Chapter 1 SNMP Configuration Commands
Description
Table 1-1.