Display Ntp-Service Trace - H3C S7500E Series Command Manual

Command Manual – NTP
H3C S7500E Series Ethernet Switches
Table 1-2 Description on the fields of the display ntp-service status command
Clock status
Clock stratum
Reference clock ID
Nominal frequency
Actual frequency
Clock precision
Clock offset
Root delay
Root dispersion
Peer dispersion
Reference time

1.1.3 display ntp-service trace

Syntax
display ntp-service trace
View
Any view
Parameters
None
Field
Status of the system clock
Stratum level of the local clock
After the system clock is synchronized to a remote time
server or a local reference source, this field indicates the
address of the remote time server or the identifier of the
local clock source respectively:
When the local clock has a stratum level of 1, the value
of this field is "LOCL";
When the stratum of the local clock has another value,
the value of this filed is the IP address of the local
clock.
The nominal frequency of the local system hardware clock
The actual frequency of the local system hardware clock
The precision of the system clock
The offset of the system clock relative to the reference
source
The roundtrip delay from the local device to the primary
reference source
The maximum error of the system clock relative to the
primary reference source
The maximum error of the system clock relative to the
reference source
Reference timestamp
Chapter 1 NTP Configuration Commands
Description
1-4