H3C S7500E Series Command Manual page 1289

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
View
FTP client view
Parameters
protocol-command: FTP command.
Description
Use the remotehelp command to display the help information of FTP-related
commands supported by the remote FTP server.
If no parameter is specified, FTP-related commands supported by the remote FTP
server are displayed.
Examples
# Display FTP commands supported by the remote FTP server.
[ftp] remotehelp
214-Here is a list of available ftp commands
Those with '*' are not yet implemented.
USER
PORT
APPE*
MKD
NOOP*
214 Direct comments to H3C company.
# Display the help information for the user command.
[ftp] remotehelp user
214 Syntax: USER <sp> <username>.
[ftp]
Table 2-3 Description on the fields of the remotehelp command
214-Here is a list of available ftp
commands
Those with '*' are not yet
implemented.
USER
PASS
CWD
CDUP
PASS ACCT* CWD
PASV TYPE STRU*
ALLO* REST* RNFR*
PWD LIST NLST
XCUP XCWD XMKD
Field
Chapter 2 FTP Configuration Commands
CDUP SMNT* QUIT
MODE* RETR STOR
RNTO* ABOR* DELE
SITE* SYST STAT*
XPWD XRMD
Description
The following is an available FTP command list.
Those commands with "*" are not yet
implemented.
Username
Password
Change the current working directory
Change to parent directory
2-23
REIN*
STOU*
RMD
HELP