Display Ip Ip-Prefix - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply ip-address next-hop 193.1.1.8

6.2.2 display ip ip-prefix

Syntax
display ip ip-prefix [ ip-prefix-name ]
View
Any view
Parameters
ip-prefix-name: IP prefix list name, a string of 1 to 19 characters.
Description
Use the display ip ip-prefix command to display the statistics of an IPv4 prefix list. If
no ip-prefix-name is specified, statistics for all IPv4 prefix lists will be displayed.
Related commands: ip ip-prefix.
Examples
# Display the statistics of IPv4 prefix list abc.
<Sysname> display ip ip-prefix abc
Prefix-list abc
Permitted 0
Denied 0
Table 6-3 Description on the fields of the display ip ip-prefix command.
Field
Prefix-list
Permitted
Denied
index
permit
1.0.0.0/11
ge
le
index: 10
Name of the IPv4 prefix list
Number of routes satisfying the match criterion
Number of routes not satisfying the match criterion
Internal serial number of the IPv4 prefix list
Matching mode: permit or deny
Match IP address and mask
greater-equal, the lower limit mask
less-equal, the upper limit mask
Chapter 6 Routing Policy Configuration Commands
permit 1.0.0.0/11
Description
6-24
ge 22 le 32