Display Dhcp-Snooping Trust - H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
D 10.1.1.1
GigabitEthernet2/0/1
--- 1 dhcp-snooping item(s) found
Table 4-1 Description on fields of the display dhcp snooping command
Type
IP Address
MAC Address
Lease
VLAN
Interface

4.1.7 display dhcp-snooping trust

Syntax
display dhcp-snooping trust
View
Any view
Parameters
None
Description
Use the display dhcp-snooping trust command to display information about trusted
ports.
Related commands: dhcp-snooping trust.
Examples
# Display information about trusted ports.
<Sysname> display dhcp-snooping trust
DHCP Snooping is enabled.
DHCP Snooping trust becomes active.
Interface
=========================
GigabitEthernet2/0/1
The above output shows that DHCP snooping is enabled, DHCP snooping trust is
active, and port GigabitEthernet 2/0/1 is trusted
000f-e200-0006 286
Field
Binding type
IP address assigned to the DHCP client
MAC address of the DHCP client
Lease period of the IP address in seconds
VLAN where the port connecting the DHCP client resides
Port to which the DHCP client is connected
Chapter 4 DHCP Snooping Configuration Commands
---
Description
============
Trusted
4-6
1
Trusted