Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
Chapter 1 IPv6 Basics Configuration Commands
Note:
The LSQ1GP12EA board does not support IPv6 features.
A tunnel interface number is in the A/B/C format, where A, B, and C represent the
slot number of a card, the slot number of a sub-card, and the tunnel interface
number, respectively. A and B vary with devices while C ranges from 0 to 1023.
1.1 IPv6 Basics Configuration Commands
1.1.1 display dns ipv6 dynamic-host
Syntax
display dns ipv6 dynamic-host
View
Any view
Parameters
None
Description
Use the display dns ipv6 dynamic-host command to display IPv6 dynamic domain
name cache information.
Examples
# Display IPv6 dynamic domain name cache information.
<Sysname> display dns ipv6 dynamic-host
No
Host
1
aaa
Table 1-1 Description on fields of the display dns ipv6 dynamic-host command
No
Host
IPv6 Address
2001::2
Field
Sequence number
Host name
Chapter 1 IPv6 Basics Configuration Commands
TTL
6
Description
1-1