H3C S7500E Series Command Manual page 641

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 log-change
5.1.48 peer next-hop-local
Syntax
peer { ipv6-group-name | ipv6-address } next-hop-local
undo peer { ipv6-group-name | ipv6-address } next-hop-local
View
IPv6 address family view
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
Description
Use the peer next-hop-local command to configure the next hop of routes advertised
to a peer/peer group as the local router.
Use the undo peer next-hop-local command to restore the default.
By default, the system sets the next hop of routes advertised to an EBGP peer/peer
group to the local router, but does not set for routes outgoing to an IBGP peer/peer
group.
Examples
# Set the next hop of routes advertised to EBGP peer group test to the router itself.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test next-hop-local
5.1.49 peer preferred-value
Syntax
peer { ipv6-group-name | ipv6-address } preferred-value value
undo peer { ipv6-group-name | ipv6-address } preferred-value
View
IPv6 address family view
Chapter 5 IPv6 BGP Configuration Commands
5-41