Display Memory; Display Power - H3C S7500E Series Command Manual

Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches

3.1.9 display memory

Syntax
display memory [ slave | slot slot-number ]
View
Any view
Parameters
slave: Displays the memory usage of the standby card.
slot slot-number: Specifies the slot number of a card. The value range varies with
devices.
Description
Use the display memory command to display the usage of the memory of all or
specified cards of a device.
Examples
# Display the usage of the memory of a device.
<Sysname> display memory
System Total Memory(bytes): 431869088
Total Used Memory(bytes): 71963156
Used Rate: 16%
Table 3-5 Description on fields on the display memory command
System Total Memory(bytes)
Total Used Memory(bytes)
Used Rate

3.1.10 display power

Syntax
display power [ power-id ]
View
Any view
Field
Total size of the system memory (in bytes)
Size of the memory used (in bytes)
Percentage of the memory used to the total
memory
3-10
Chapter 3 Device Management Commands
Description