H3C S7500E Series Command Manual page 1272

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
Parameters
None
Description
Use the binary command to set the file transfer mode to binary (also called flow mode).
FTP provides two file transfer modes: ASCII and binary. To transfer text files, use the
ASCII mode; to transfer program files, use the binary mode.
By default, the transfer mode is ASCII mode.
Examples
# Set the file transfer mode to binary.
[ftp]binary
200 Type set to I.
2.2.3 bye
Syntax
bye
View
FTP client view
Parameters
None
Description
Use the bye command to disconnect from the remote FTP server and exit to user view.
Examples
# Terminate the connection with the remote FTP server and exit to user view.
[ftp]bye
221 Server closing.
<Sysname>
2.2.4 cd
Syntax
cd pathname
View
FTP client view
Chapter 2 FTP Configuration Commands
2-6