Arp Configuration Commands; Arp Static; Chapter 1 Arp Configuration Commands; Arp Max-Learning-Num - H3C S7500E Series Command Manual

Command Manual – ARP
H3C S7500E Series Ethernet Switches

Chapter 1 ARP Configuration Commands

1.1 ARP Configuration Commands

1.1.1 arp max-learning-num

Syntax
arp max-learning-num number
undo arp max-learning-num
View
VLAN interface view
Parameters
number: Maximum number of dynamic ARP entries that a VLAN interface can learn, in
the range 1 to 8192.
Description
Use the arp max-learning-num command to set the maximum number of dynamic
ARP entries that a VLAN interface can learn.
Use the undo arp max-learning-num command to restore the default.
By default, a VLAN interface can learn up to 8,192 dynamic ARP entries.
Examples
# Specify VLAN-interface 40 to learn up to 500 dynamic ARP entries.
<Sysname> system-view
[Sysname] interface vlan-interface 40
[Sysname-Vlan-interface40] arp max-learning-num 500

1.1.2 arp static

Syntax
arp static ip-address mac-address [ vlan-id interface-type interface-number ]
undo arp ip-address
View
System view
Chapter 1 ARP Configuration Commands
1-1