H3C S7500E Series Command Manual page 879

Command Manual – 802.1x - MAC Authentication
H3C S7500E Series Ethernet Switches
Configuration: Transmit Period
EAD quick deploy configuration:
Total maximum 802.1x user resource number is 2048 per slot
Total current used 802.1x resource number is 0
Ethernet2/0/1
802.1X protocol is disabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Handshake is disabled
The port is an authenticator
Authenticate Mode is Auto
Port Control Type is Mac-based
Guest VLAN: 0
Max on-line user number is 256
EAPOL Packet: Tx 0, Rx 0
Sent EAP Request/Identity Packets : 0
EAP Request/Challenge Packets: 0
EAP Success Packets: 0, Fail Packets: 0
Received EAPOL Start Packets : 0
Controlled User(s) amount to 0
Table 1-1 Description on the fields of the display dot1x command
Equipment 802.1X protocol is
enabled
CHAP authentication is enabled
Quiet Period
Supp Timeout
The maximal retransmitting times
URL: http://192.168.0.38
Free IP: 192.168.0.0 255.255.255.0
EAD timeout:
is link-up
EAPOL LogOff Packets: 0
EAP Response/Identity Packets : 0
EAP Response/Challenge Packets: 0
Error Packets: 0
Field
Chapter 1 802.1x Configuration Commands
30 s, Handshake Period
60 s, Quiet Period Timer is disabled
30 s, Server Timeout
30 m
Description
Indicates whether 802.1x is enabled
Indicates whether CHAP authentication is
enabled
1-2
15 s
100 s
3