Display Qos Policy Interface - H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches
Committed Access Rate:
Table 2-6 Description on the fields of the display qos policy global command
Direction
Policy
Classifier
Behavior

2.3.4 display qos policy interface

Syntax
display qos policy interface [ interface-type interface-number ] [ inbound |
outbound ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
Description
Use the display qos policy interface command to display the configuration and
statistics information about the policy applied on a port.
If no interface is provided, the configuration and statistics information about the policies
applied on all the ports is displayed.
Examples
# Display the configuration and statistics information about the policy applied on
Ethernet2/0/1 port.
0 (Packets)
CIR 640 (kbps), CBS 4000 (byte), EBS 4000 (byte)
Green Action: pass
Red Action: discard
Yellow Action: pass
Green : 0(Packets)
Field
Chapter 2 QoS Policy Configuration Commands
Description
Direction in which the policy is applied globally
Policy name
Class name
Traffic behavior name
2-21