Display Portal Interface - H3C S7500E Series Command Manual

Command Manual – Portal
H3C S7500E Series Ethernet Switches
Field
Destination
IP
Mask

1.1.4 display portal interface

Syntax
display portal interface interface-type interface-number
View
Any view
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display portal interface command to display the portal configuration of an
interface.
Examples
# Display the portal configuration of interface Vlan-interface 2.
<Sysname> display portal interface Vlan-interface 2
Interface portal configuration:
Vlan-interface 2: Portal running
Portal server: servername
Authentication type: Direct
Authentication network:
address = 0.0.0.0
Table 1-4 Description on the fields of the display portal interface command
Interface portal configuration
Vlan-interface 2
Portal server
Authentication type
Authentication network
address
Destination information in the portal-free rule
Destination IP address in the portal-free rule
Subnet mask of the destination IP address in the portal-free rule
mask = 0.0.0.0
Field
1-7
Chapter 1 Portal Configuration Commands
Description
Description
Portal configuration on the interface
Status of the portal feature on the interface
Portal server referenced by the interface
Authentication mode enabled on the interface
Information of the portal authentication subnet
IP address of the portal authentication subnet