Ntp-Service Reliable Authentication-Keyid - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – NTP

H3C S7500E Series Ethernet Switches

ip-address: IP address of the local clock, which is 127.127.1.u, where u is the NTP

process ID, in the range of 0 to 3. If you do not specify ip-address, it defaults to

127.127.1.0.

stratum: Stratum level of the local clock, in the range of 1 to 15 and defaulting to 8.

Use the ntp-service refclock-master command to configure the local clock as a

reference source for other devices.

Use the undo ntp-service refclock-master command to remove the local clock as a

reference source.

The stratum level of a clock defines the clock precision. The value range is 1 to 16. The

clock precision decreases from stratum 1 to stratum 16. A stratum 1 clock has the

highest precision, and a stratum 16 clock is not synchronized and cannot be used as a

reference clock.

# Specify the local clock as the reference source, with the stratum level of 3.

<Sysname> system-view

[Sysname] ntp-service refclock-master 3

1.1.14 ntp-service reliable authentication-keyid

ntp-service reliable authentication-keyid keyid

undo ntp-service reliable authentication-keyid keyid

keyid: Authentication key number, in the range of 1 to 4294967295.

Chapter 1 NTP Configuration Commands

Table of Contents