Display Bgp Ipv6 Routing-Table - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
ipv6-address: Specifies the IPv6 address of a peer to be displayed.
log-info: Displays log information of the specified peer.
verbose: Displays the detailed information of the peer.
Description
Use the display bgp ipv6 peer command to display peer/peer group information.
If no parameter specified, information about all peers and peer groups is displayed.
Examples
# Display all IPv6 peer information.
<Sysname> display bgp ipv6 peer
BGP Local router ID : 20.0.0.1
local AS number : 100
Total number of peers : 1
Peer
20::21
Table 5-4 Description on the fields of the display bgp ipv6 peer command
Peer
V
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State

5.1.14 display bgp ipv6 routing-table

Syntax
display bgp ipv6 routing-table [ ipv6-address prefix-length ]
V AS MsgRcvd MsgSent
4 200 17 19
Field
IPv6 address of the peer
Peer BGP version
AS number
Messages received
Messages sent
Messages to be sent
Number of prefixes received
The lasting time of a session/the lasting time of present
state (when no session is established)
Peer state
Chapter 5 IPv6 BGP Configuration Commands
Peers in established state : 1
OutQ PrefRcv
0 3
Description
5-12
Up/Down State
00:09:59 Established