Remark Ip-Precedence - H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches
cs7
ef
Description
Use the remark dscp command to configure the action of setting DSCP precedence
for a traffic behavior.
Use the undo remark dscp command to remove the action of setting DSCP
precedence.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the action to set DSCP precedence to 6 for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark dscp 6

2.2.11 remark ip-precedence

Syntax
remark ip-precedence ip-precedence-value
undo remark ip-precedence
View
Traffic behavior view
Parameters
ip-precedence-value: IP precedence to be set for packets, in the range of 0 to 7.
Description
Use the remark ip-precedence command to configure the action of setting IP
precedence for a traffic behavior.
Use the undo remark ip-precedence command to remove the action of setting IP
precedence.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the action to set IP precedence to 6 for a traffic behavior.
Keyword
111000
101110
Chapter 2 QoS Policy Configuration Commands
DSCP value (binary)
2-15
DSCP value (decimal)
56
46