H3C S7500E Series Command Manual page 572

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Table 3-18 Description on the fields of the display ospfv3 vlink command
Virtual Link VLINK1 to router 1.1.1.1 is
up
Transit area 0.0.0.1 via interface
Vlan-interface100
instance ID
Local address
Remote address
Transmit Delay
State
Timer intervals configured, Hello: 10,
Dead: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:02
Adjacency state
3.1.18 filter-policy export
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ isisv6 process-id |
ospfv3 process-id | ripng process-id | bgp4+ | direct | static]
undo filter-policy export [ isisv6 process-id | ospfv3 process-id | ripng process-id |
bgp4+ | direct | static ]
View
OSPFv3 view
Parameters
acl6-number: Specifies the ACL6 number, ranging from 2000 to 3999.
ipv6-prefix ipv6-prefix-name: Specifies the name of an IPv6 prefix list, a string of up to
19 characters.
isisv6 process-id: Specifies to filter the routes of an IPv6-IS-IS process, which is in the
range of 1 to 65535.
ospfv3 process-id: Specifies to filter the routes of an OSPFv3 process, which is in the
range of 1 to 65535.
ripng process-id: Specifies to filter the routes of a RIPng process, which in the range of
1 to 65535.
Chapter 3 IPv6 OSPFv3 Configuration Commands
Field
3-24
Description
The virtual link VLINK1 to router 1.1.1.1
is up
Interface VLAN-interface 100 in transit
area 0.0.0.1.
Instance ID
Local IPv6 address
Remote IPv6 address
Transmit delay of sending LSAs
Interface state
Timer intervals in seconds, Hello: 10,
Dead: 40, Wait: 40, Retransmit: 5
Send hello packets in 2 seconds.
Adjacency state